Self-adhesive foil for banners and awnings 3451



Basis: PVC.

Thickness: 80 µm.

Type of substrate: silicone paper with double-sided polyethylene coating, 148 g/m².

Type of glue: polyacrylate adhesive, solvent-based, providing permanent adhesion, transparent.

Gluing temperature: +8°C.

Roll width: 137 cm.

Roll length: 50 m.

Surface: white.

Printing: solvent, latex, UV inks.

Application: advertising on banners and awnings.

Service life: 4 years.

Manufacture: Germany.


White self-adhesive foil for banners and tents with permanent glue. The film possesses UV stability and high level of elasticity that allows to apply it on a flexible basis, including advertising on the awning transport. Self-adhesive film designed for wide format solvent printing, and UV printing and latex inks. The film is suitable for short and medium-term outdoor applications.


Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours).

Prior to installation of the film is necessary to clean the surface with special cleaners. The ideal temperature for installation of self-adhesive film of 20-22°C. the Ideal temperature of dismantling film 19°C, with the dismantling of the street in the cold season it is recommended to use a hot blowout.