Self adhesive print film with a removable adhesive 3352F

 

Specifications

Basis: PVC.

Thickness: 70 µm.

Type of substrate: polyester film with one-side silicone-coated, 36 µm.

Type of glue: polyacrylate adhesive, removable.

Gluing temperature: +10°C.

Roll width: 137 cm.

Roll length: 25 m.

Surface: transparent, glossy.

Printing: solvent, latex, UV inks.

Application: window graphics, interior design.

Service life: 1 year.

Manufacture: Germany.

Application

Super transparent self-adhesive polyester film for printing window graphics. This optically clear film with removable adhesive designed specifically for advertising on Windows and display cases, creating the effect of direct printing on the glass.
3352F self-adhesive film designed for wide format solvent printing, and UV printing and latex inks. The film is suitable for indoor use and short term outdoor use.

Use

Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. After use, the film is easily removed from wall surfaces without leaving residue.

To ensure a longer service life of the film is recommended to laminate the finished print. Lamination allows to give the image a glossy sheen, and to preserve color depth and to protect the product from moisture and damage, greatly prolonging its service life.

Close