Self adhesive print film with a removable adhesive 3268



Basis: PVC.

Thickness: 150 µm.

Type of substrate: silicone paper coated on one side coated, 135 g/m².

Type of glue: adhesive polyacrylate, easily removable.

Gluing temperature: +10°C.

Roll width: 137, 152 cm.

Roll length: 50 m.

Surface: white, glossy and matte.

Printing: solvent, latex, UV inks.

Application: interior design, printing advertising graphics (advertising on the walls in the areas of sales, design of trading floors).

Service life: 2 years.

Manufacture: Germany.


Self adhesive white PVC film for decorating interior walls with removable adhesive. High dimensional stability of the film allows large format graphics to stick without wrinkling. The film has easily removable type glue and is removed from the surface of walls, without leaving traces. Film is used for interior design and print promotional graphics (advertising on the walls in the areas of sales, design of trading floors). Self-adhesive film designed for wide format solvent printing, and UV printing and latex inks. Suitable for indoor use.


Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. After use, the film is easily removed from wall surfaces without leaving residue.

To ensure a longer service life of the film is recommended to laminate the finished print. Lamination allows to give the image a glossy sheen, and to preserve color depth and to protect the product from moisture and damage, greatly prolonging its service life.