Self adhesive print film with a removable adhesive 1663



Basis: PVC.

Thickness: 110 µm.

Type of substrate: silicone paper coated on one side coated, 135 g/m².

Type of glue: polyacrylate adhesive, solvent-based, removable, transparent (for 3 years, can be removed without leaving residue, from most surfaces).

Gluing temperature: +8°C.

Roll width: 137 cm.

Roll length: 50 m.

Surface: white, glossy and matte.

Printing: solvent, latex, UV inks.

Application: outdoor promotional graphics.

Service life: 3 years.

Manufacture: Germany.


White film for floor graphics with removable adhesive. The film has a high level of pigmentation and excellent opacity, which allows her to fully cover the color of the floor. Easily removable film designed for wide format solvent printing, and UV printing and latex inks. The film is suitable for short term use, is removed from the floor surface, without leaving adhesive residue.


Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. After use, the film is easily removed from wall surfaces without leaving residue.

To ensure a longer service life of the film is recommended to laminate the finished print. Lamination allows to give the image a glossy sheen, and to preserve color depth and to protect the product from moisture and damage, greatly prolonging its service life.