Polyester fabric JM Ventex FR for digital printing

 

Specifications

Composition: 100% polyester.

Density: 220 (+/-15) g/m².

Roll width: 152, 310 cm.

Roll length: 30, 50 m.

Finish: white matte, one-sided.

Printing: solvent, ecosolvent, lite-solvent, latex, UV ink for indoors use.

Application: ceilings, frame systems stage sets, exhibition graphics, roller blinds.

Manufacture: Germany.

Application

White lightweight woven fabric, coated on one side with a special polymer that provides high whiteness. The fabric does not support combustion, so it can be used for decorating residential and commercial premises. Knitted fabric has a slight stretch factor, keeps the shape well, does not crease, it is resistant to abrasion. Ideal for textile profile systems. At minimum cost of ink allows to obtain excellent prints.

Environmentally friendly (no PVC). Can be used in premises with high requirements of environmental safety.

Use

In digital textile printing it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing the textile with the finished image must be left in straightened condition on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours).

Close