Polyester fabric JM Aqua for digital printing

 

Specifications

Composition: 100% polyester.

Density: 110 (+/-10) g/m².

Roll width: 137 cm.

Roll length: 25 m.

Finish: white, matt, water-resistant.

Printing: solvent, eco-solvent, lite-salmenniemi and UV ink.

Application: light boxes, displays, ceilings, dividing walls, curtains for bathrooms, outdoor advertising at various facilities.

Manufacture: Germany.

Application

Polyester fabric ― white, light fabric, coated on one side with a special polymer that provides high whiteness, which at minimum cost of ink allows to obtain excellent prints. Designed for single-sided printing with solvent,eco-solvent and UV inks. Due to the nature of the coating material to the minimum extent prone to wave generation.

The fabric is water resistant, has a water-repellent anti-fungus coating. These features allow to use this fabric for making blinds for bathrooms, as well as displays, light boxes, outdoor advertising at various facilities, suspended ceilings and dividing walls.

The material is pozharobezopasna (protection class B1), which gives the ability to place it in premises with high fire safety requirements.

Use

In digital textile printing it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing the textile with the finished image must be left in straightened condition on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours).

Close