Polyester fabric JM Air for digital printing



Composition: 100% polyester.

Density: 230 (+/-15) g/m².

Roll width: 152, 310 cm.

Roll length: 30, 50 m.

Finish: white, water resistant.

Printing: solvent, ecosolvent, lite-solvent, latex, UV ink for use indoors and outdoors.

Application: external and internal advertising, roll-up, pop-up, banners, theatrical scenery, printing of paintings and photographs, ceilings, blinds, expo segment.

Manufacture: Germany.


Bright white polyester fabric with double-sided polymer impregnation, which allows to obtain high-quality images. The material is highly flexible and therefore also suitable for textile architecture (overlapping, peaks) and printing large format.

The fabric is water resistant. Matte finish simulating natural canvas, greatly expands the possibilities for use of this material. The fabric is environmentally friendly, unlike PVC. The material is fireproof (B1) and can be used in premises with high security requirements, such as fire and environmental.


In digital textile printing it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing the textile with the finished image must be left in straightened condition on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours).