Silver water-based paint Eco Superstar for printing on textiles

 

Description


Eco Superstar - silver water soluble ink for screen printing on textiles colored designs with the "silver effect". Silver particles in the paint are not glitter not made of metal powder and pure milled aluminum. Particles give the aluminium paint excellent reflective effect and high brightness. To obtain a colored metallic pigments used Aqua Tint.

 

Print options


Types of fabrics

100% cotton, mixed cotton fabrics, polyester.

Mesh selection

32 threads/cm.

Recommended tension: 25-35 N/cm.

The choice of the doctor blade

Hardness: single-layer 65 Sh.

Speed: average.

Tilt angle: 75°.

Stencil

Emulsion: 2+2.

Printed gap: 2 mm.

The drying parameters

Intermediate drying: 93-99 °C.

Final drying: 150 °C, 3 minutes.

Supplements

Additives: pigments Aqua Tint - max 5% by weight.

Thinner: Reducer 77, the Jet Reducer to 3% by weight.

Retarder: Hydracryl Retarder - up to 5% by weight.

Retainer: Special Fixer, Universal Fix to be resistant to washing up to 15% by weight.

Storage

Store at temperature 18-32º C.

Avoid contact with direct sunlight.

To use during the year of receipt.

 

Features


• prepared water paint "effect of silver";

• the best results are achieved when printing on dark fabrics;

• create special metallic effects, adding 5% pigment of the desired color in the weight;

• odorless;

• elastic paint with excellent adhesion;

• easy passage through recommended meshes.

 

Printing guidelines


• for best results, follow the recommended printing parameters and the number of grids;

• avoid excessive pressure on the squeegee when printing;

• printing: in two passes, with subsequent drying before printing the next color;

• exact drying times cannot be given due to objective differences in power, distance to the heating element intermediate drying, and the thickness of the applied layer of paint;

• to optimize the printing process use a well-strained shape;

• before printing, necessary in dye to add 3-5% thinner Reducer 77, which prevents the thickening of the ink on the printed form, for subsequent dilution to use only the diluent Jet Reducer (1-3%);

• retarder Hydracryl Retarder helps to improve the stability of the paint on the stencil. Additive of 3-5% in the paint;

• to improve resistance to washing, a possible Supplement of up to 10-15% Special Fixer. The mixture's work time is limited to 8-10 hours;

• to clean the screen form in cluding the printing process used water.

 

Special recommendation


• test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means;

• responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options;

• before printing the paint should be stirred;

• decrease the viscosity of the paint (when diluted) affects opacity;

• for any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.

Close