Special glue Cosmofen PMMA for bonding articles made of acrylic



The basis
Setting time
Full cure
Temp. application
The polymer in the solvent
1 min.
24 hours
above +5 °C
200 gr.


Glue Cosmofen PMMA is used in the production of promotional products, during installation of Windows for fast and durable bonding of articles made of acrylic. Also used for bonding to any structures and details of acrylic glass. Glue Cosmofen PMMA can be successfully used in the production of window designs, the automotive industry and everywhere, where is used the acrylic. Can also be used for bonding products made from other polymers, such as polystyrene.

Adhesive Cosmofen Plus HV is characterized by good temperature stability and resistance to UV rays.

Usage instructions

The bonding surfaces be pre-cleaned of dirt, grease, moisture, and other contamination using the cleaner COSMOFEN 20. The fabric or cloth used for cleaning must not leave lint or traces of dyes. Adhesive Cosmofen PMMA is applied with a snake on one surface straight from the tube. The bonding elements must be connected with each other within the open time (30-60 seconds) and continue to hold, if necessary, to extrude, to achieve functional strength. The adhesive joint can withstand the load of approximately 16 hours. Final solidification of the weld will occur after a maximum of 8 weeks, depending on external conditions. The exact open time and the time required for pressing can be set only by local tests, as it depends on the material, temperature, amount of adhesive applied, humidity, and other criteria.


Store in tightly closed, original containers, avoiding direct sunlight. Shelf life at temperatures from +15°C to +25°C 12 months.