White plastisol ink for printing on cotton and mixed fabrics Athletic Trophy White


Plastisol paint Athletic Trophy White is a white paint of high viscosity, designed for unsurpassed opacity and overlap of lint and fibers during printing, and resistance to migration of the dyes. Despite the fact that paint has been specially designed for synthetic fabrics, when printed on which possible migration of dyes, the Athletic Trophy White paint is of premium class, and can be used as the main paint for any printed works.


Print options

Types of fabrics

Cotton, mixed fabrics, various types of polyester, some types of nylon (large netting), as well as other types of synthetics. On some types of fabric possible migration of dyes.

Mesh selection

24-77 threads/cm, depending on the type of printing.

Recommended tension: 25-35 N/cm.

The choice of the doctor blade

Hardness: 75 Sh a single-layer, three-layer 65/90/65 Sh.

Profile: rectangular.

Edge: sharp for printing small parts, rounded for a big fill.

Speed: average.


Emulsion: 2+2.

Printed gap: 2 mm.

The drying parameters

Intermediate drying: 76-87 °C (170-189 °F).

Final drying: 160 °C (320 °F).


Thinner: no.

Thickener: 10025VB QEC Viscosity Buster - 3% by weight.


Store at temperature 18-32º C.

Avoid contact with direct sunlight.

To use during the year of receipt.



• fast intermediate drying and minimal residual stickiness;

• does not require a cooling station;

• excellent overlap of cloth and fibers;

• high opacity and brightness;

• good resistance to migration of the dye;

• odorless;

• matte prints;

• used as a substrate, and as a standalone white.


Printing guidelines

• for best results, follow the recommended print settings;

• avoid excessive pressure on the squeegee when printing;

• given the difference in power, the distance from the dryer to the paint layer and the intermediate drying efficiency, the exact drying times cannot be given;

• to increase the speed of production, use mesh higher resolution, which will reduce the drying time. Before you print, run the desktops of the machine. Adjust the machine settings and drying so that after intermediate drying of the top layer of paint was dry to the touch;

• use well-strained shape to optimize the printing process.


Special recommendation

• Test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means.

• Responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options.

• It is necessary to conduct preliminary tests on weakly stained or discolored materials. Avoid hot styling products in the foot, because the fabric of these colors can lead to spurious staining. Remember, the characteristics of the fabrics and colors may vary depending on manufacturer and batch of fabric.

• Avoid excessive intermediate drying, as this may result in poor adhesion of paint layers when multi-color printing.

• When printing on fabrics made of polyester should be preliminary tests because of the possible migration of dyes.

• Before printing the paint should be stirred.

• Sealed image can not be subjected to dry cleaning, bleaching, and Ironing with a hot iron.

• For any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.